The Demo Site

现在市面上几乎所有的笔记型计算机，都内建的无线网络功能。虽然无线网络带给我们便利性，但无线网络因为受限于技术上问题，所以线路的稳定性以及质量，是 比不上有线网络。使用无线网络最怕的就是信号不佳，但又不见得知道哪个地方的讯号比较好，这时我们就可以透过WirelessMon来做监控的动作，它可 以列出当前计算机附近所拥有的无线网络或基地台等相关信息，并且会列出计算机与基地台间的信号强度；它还可以实时的监测无线网络的传输速度，以便让我们了 解网络的下载速度或其稳定性。

WirelessMon is a software tool that allows users to monitor the status of wireless WiFi adapter(s) and gather information about nearby wireless access points and hot spots in real time. WirelessMon can log the information it collects into a file, while also providing comprehensive graphing of signal level and real time IP and 802.11 WiFi statistics.

Verify 802.11 network configuration is correct.
Test WiFi hardware and device drivers are functioning correctly.
Check signal levels from your local WiFi network and nearby networks.
Help locate sources of interference to your network.
Scan for hot spots in your local area (wardriving)
Create signal strength maps of an area
GPS support for logging and mapping signal strength
Correctly locate your wireless antenna (especially important for directional antennas).
Verify the security settings for local access points.
Measure network speed & throughput and view available data rates.
Help check Wifi network coverage and range

Compatibility
Any wireless adapter complies with the NDIS_802.11 should be able to report information to WirelessMon. Note that only Windows 2000 (Service pack 4 and above), XP and 2003 support this software. Windows 95, 98 and NT are not supported. All the various IEEE 802.11 standards are supported, including 802.11a, 802.11b and 802.11g. Some features may not be supported by some wireless adapters, typically they will report only partial information in this case. It has been also been noted that several wireless adapter manufacturers are not providing device drivers that are fully Windows compliant.

v2.1 build 1000 18/October/2007
Config file has been moved to Application Data folder to be more Vista friendly
Added "connected" instead of "available" status and different color icon for connected access point in summary tab list
Added connection speed to summary screen
Added new option to load a new map if map is missing from project file, if map is the same map in a different location or a new map with the same dimensions then the samples in the project file wont be lost
Added interpolation function on the map tab to calculate signal strengths for blank areas of a signal strength map
Added reload cards button next to network card selection to reload the wireless cards in case configuration has changed
Added security method in use to Security column on summary tab for Vista if known
Changed behavior when loading a new map in the map options, if map is same size current samples are no longer reset
Changed sorting behavior slightly of access point list on summary tab and fixed a bug causing some columns to be sorted incorrectly
Fixed a crash in Vista that could occur when removing and adding USB wireless cards
Fixed bug when connecting to a SSID with a shorter name could leave old characters from the old name in the SSID description
Fixed bug where WirelessMon would try to auto-connect when an access point was open but SSID was hidden when selecting "Connect to access point". Now dialog will be displayed so SSID can be entered
Fixed a crash that could be caused by changing between available cards
Fixed some error messages when reconnecting to an access point after a resume
Fixed a bug where the wrong MAC address could be used when reconnecting after a resume
Fixed an error message when installing in Vista preventing WirelessMon from running at the end of the install process

官网：http://www.passmark.com/products/wirelessmonitor.htm
~Support Windows 2000(SP4), XP, 2003, Vista~


Download